maradydd: (Default)
maradydd ([personal profile] maradydd) wrote2009-10-07 10:22 pm
Entry tags:

[LJ Genie] Hardware of the non-electronic kind

Dear LJ Genie,

What's the best way to hang a pegboard on an exposed (indoor) brick wall?

[identity profile] shingkhor.livejournal.com 2009-10-07 08:38 pm (UTC)(link)
self tapping concrete screws? the holes they leave are pretty much unnoticeable on brick.

[identity profile] palecur.livejournal.com 2009-10-07 08:40 pm (UTC)(link)
This beats my 'masonry anchors in the mortar' idea, and therefore I abandon it in favor of this superior notion.

[identity profile] maradydd.livejournal.com 2009-10-07 09:04 pm (UTC)(link)
/me googles about them -- that looks perfect. Does the pilot hole actually need to be drilled with a hammer drill, or can I get away with an ordinary power drill? I assume the carbide bit is non-negotiable.

[identity profile] patrickwonders.livejournal.com 2009-10-07 09:11 pm (UTC)(link)
You can probably get away with a strong drill (not your standard-issue rechargeable, but a strong rechargeable or a corded drill).

Alternately, in some situations, it's easier to drill into the ceiling above, find something substantial to screw into, and mount rubber stoppers on the back of the pegboard so it doesn't swing around much.

[identity profile] maradydd.livejournal.com 2009-10-07 09:15 pm (UTC)(link)
Some day I will have a rechargeable DeWalt like [livejournal.com profile] ti94's dad has (it tore right through a steel cabinet with a 2" hole-saw bit!), but for now, my 5-amp corded Craftsman is my best buddy.
Edited 2009-10-07 21:16 (UTC)

[identity profile] shingkhor.livejournal.com 2009-10-07 09:36 pm (UTC)(link)
Most corded drills will work just fine - they tend to have more power than rechargeable anyway.

Also, Patrick T makes a good point about offsetting from the wall. I'm doing this for my garage really soon(not a brick wall) and pretty much building a (hollywood) flat (http://en.wikipedia.org/wiki/Flats_(theatre)) and hanging it on hooks.

[identity profile] bigby.livejournal.com 2009-10-08 03:41 am (UTC)(link)
I have had no trouble going through regular construction brick with any random driver, you just have to go slow and be patient. Have spare bits. There are harder brick variants that are not friendly at all, then you go into the mortar. Depending on what you will be mounting on the board, spacing it out from the wall is key. We mounted one once by sinking strips of 1x2 into the wall then the board to the 1x2s.